Where is the temperature sensor on a 2010 Chevy Silverado?
Air Temperature Sensor (Upper Right ) (CJ2) (2) Under upper right side of dash.
Is map and MAF sensor the same?
While a MAF sensor is always located before the throttle body, a MAP sensor can usually be found attached to the intake manifold. In a MAP sensor-only setup, however, it needs to be located after the throttle body (and usually inside the intake manifold) to be able to measure both vacuum and positive air pressures.
What does the intake air temp sensor say?
This means that the IAT sensor is reporting a temperature of 300 °F (149 °C). P0113: Intake Air Temperature (IAT) Sensor Circuit High Voltage. This means that the IAT sensor is reporting a temperature of -38 °F (-39 °C). Bad gas mileage. Black smoke coming out of the tailpipe. Won’t pass the emissions test.
Where are the air temperature sensors on a Chevy Silverado?
Air Temperature Sensor (Upper Left) (CJ2) (1) Under upper left side of dash. Air Temperature Sensor (Upper Right ) (CJ2) (2) Under upper right side of dash. Ambient Air Temperature Sensor – HVAC (CJ2) (3) On left side of radiator support. Ambient Air Temperature Sensor (ISRVM) On radiator support.
What does DTC for intake air temp mean?
The second will be an IAT sensor malfunction diagnostic trouble code (DTC) stored in the PCM memory. Here are some of the specific symptoms you’ll see/have: P0112: Intake Air Temperature (IAT) Sensor Circuit Low Voltage. This means that the IAT sensor is reporting a temperature of 300 °F (149 °C).
Where are the coolant temperature and oil pressure sensors?
Engine Coolant Temperature (ECT) Sensor (Diesel) Top front center of engine. Engine Coolant Temperature (ECT) Sensor (4.3L) Left side of engine. Engine Coolant Temperature (ECT) Sensor (4.8L, 5.3L, 6.0L & 6.2L) On top of engine. Engine Oil Pressure (EOP) Sensor (Diesel) Lower left rear of engine.