Table of Contents
What is the top of a crane called?
The basic components of a tower crane are a vertical tower—also known as a mast—and an outstretched jib. The trolley and hook block travel along the jib, which can rotate 360 degrees around the mast (this motion is called slewing).
What is an A frame crane?
The A Frame Hoist – Steel Gantry Crane is perfect for transporting and positioning large, bulky materials along the beam length. Four 8″ swivel casters enable swift portability within a facility and V-groove casters with track are also available. This unit has an adjustable height in 6″ increments.
What are the parts of a crane called?
Here are the different parts of a crane.
- Hook. Though all parts of a crane are essential to its ability to lift and move heavy loads, none of it would be possible without the hook.
- Hoist. The hoist is the part that creates lift in a rigging system.
- Counterweights and Outriggers.
What are the parts of an overhead crane?
The principal parts of overhead traveling cranes are: bridge girders, end trucks, trolley with hoisting mechanism, an operator’s cab or pendant control. Careful repair and maintenance are essential to safe crane operations.
What is parts of crane any 5 parts?
Crane Parts and Functions
- The Hook. This may be one of the most recognizable and important parts of a construction crane.
- Wire Rope and Sheaves. Cranes use heavy-duty wire ropes to lift extreme loads.
- The Boom.
- Wheels and Tracks.
- The Hoist.
- The Jib.
Which is a type of crane?
Types of Cranes and Uses of Carnes
|Sr.No.||Types of Cranes||Use of Cranes|
|1||Telescopic Crane||Highly adaptable for a variety of mobile situations|
|2||Mobile Crane||Lift heavy objects and move them short distances|
|3||Truck Mounted Crane||Mainly for loading and moving equipment on job site|
|4||Tower Crane||Building large structures|
What are gantry cranes used for?
Full gantry or semi-gantry cranes are commonly used for heavy fabrication applications, or in some type of outdoor yard—rail yards, shipping and container yards, steel yards, and scrap yards. They’re also very popular for cement and precast applications for areas where they’re forming and curing slab concrete.
What is Agantry?
A gantry is an overhead bridge-like structure supporting equipment such as a crane, signals, or cameras.
What are the parts of a construction crane?
Tower cranes in general are composed of three main parts: the base, the mast or tower, and the slewing unit.
What is the bridge on a crane?
BRIDGE – That part of an overhead crane consisting of girders, trucks, end ties, walkway and drive mechanism which carries the trolley and travels in a direction parallel to the runway. BRIDGE GIRDER – The main horizontal structural member(s) of the crane bridge supported by the end trucks.
What kind of structure is a crane?
Tower cranes and communication towers are examples of frame structures. Frames are made from bars joined together to form a ‘framework’. This is one of the most economical ways of building structures. Some modern buildings have a frame structure which can only be seen during construction.
What are the parts of a tower crane?
Parts of Tower Crane The parts of the tower crane are: Mast or Main Post: The vertical post that is placed on the base or base. Boom or jib: the arm of the tower crane that consists of an iron structure.
Which is the best description of a crane?
A crane is a machine for lifting and lowering a load and moving it horizontally, with the hoisting mechanism an integral part of the machine. Cranes whether fixed or mobile are driven manually or by power. An automatic crane is a crane which when activated operates through a preset cycle or cycles.
What does it mean to have an overhead crane?
Overhead crane means a crane with a movable bridge carrying a movable or fixed hoisting mechanism and traveling on an overhead fixed runway structure.
How does a tower crane pull a load up or down?
The upper part of the tower crane mast consists of a swivel arm and a winch that serves to pull the load up or down. And what is special is that the winch can move back and forth along the boom. The winch can rotate 360 degrees from the arm of the tower crane.