How can I make my concrete stairs look better?

How can I make my concrete stairs look better?

There are a lot of designs you can use as a basis to make your concrete steps look better from painting, applying decorative tiles, wood planks, bricks, or even stamped concrete. However, before you start your makeover project it is important to check if your concrete steps are in need of repairs.

Can concrete steps be resurfaced?

The good news is that as long as the concrete is viable, your concrete steps can be resurfaced. This means that you can get beautiful steps that are also safe to walk on without having to replace your existing concrete steps.

How much does it cost to resurface cement stairs?

Resurfacing concrete ranges between $300 and $600 for most staircases. The cost of sealing the concrete increases that budget by $100 to $300.

How do you fill gaps in concrete steps?

Thin cracks can be filled with masonry crack filler or concrete repair caulk and a caulk gun. Use the gun to force a thick bead of caulk into the crack. Shape the caulk with a putty knife or trowel and allow it to dry.

Can you tile over concrete steps?

Tiles meant for indoor use will not work when tiling concrete stairs outdoors. Place a tile over the mortar and push it down until it sits flat against the stairs. Put grout spacers in-between each tile to leave areas for the grout to be added later. If needed, use the tile cutter to cut any tiles to the proper size.

How do you fix hollow concrete steps?

Repair superficial damage by applying a layer of concrete patch with a mason’s trowel. For structural damage, put the concrete mix over the holes or damaged areas with a square head shovel. Fill the holes and smooth the surface with a trowel. Work the new concrete into the pores of the existing concrete.

How do you remove old concrete steps?

Steps for Removing a Concrete Slab

1. Step 1: Create a Void Under the Concrete. The best way to speed up concrete removal is to create a void underneath the section of slab you’re working on.
2. Step 2: It’s Hammer Time.
3. Step 3: Pull Apart and Remove the Broken Concrete.
4. Step 4: Repeat Steps Until Concrete Is Demolished.

What can I use to fill cracks in concrete?

Narrow cracks can be filled with a masonry concrete crack filler that comes in a cartridge designed to be used in a caulking gun. Alternatively, you can create a concrete patch with a vinyl concrete patching compound applied and smoothed with a putty knife.

How much does a concrete stair cost?

From our research online, the average cost will be about $300 to $500 per three to four-foot wide simple step to be installed professionally. While concrete, as a material, is cheaper than stone, it will be more expensive due to the time it takes to install.

How do you replace concrete steps?

How to Replace Precast Concrete Steps Step 1: Remove the Old Concrete Steps Step 2: Measure the Area for the New Precast Concrete Steps Step 3: Prepare the Base for the New Steps Step 3: Lay the Precast Base Slab Step 4: Place the Precast Concrete Steps Step 5: Check the Steps Are Level Step 6: Seal the Edges of the Concrete Steps

How do you repair a cracked concrete wall?

Concrete Walls. To repair a concrete wall you will need an epoxy repair kit. The epoxy will make a watertight seal in the crack. Begin your repair by tapping 3-inch finish nails partially into the crack every 12 inches; these nails will attach injection ports.

How do you fix a concrete step?

Steps Clean the damaged portion of the concrete step. Make a form. Align the wood form. Lubricate the form. Apply bonding liquid. Prepare quick-setting cement. Dampen the area. Apply the cement. Smooth the newly laid cement. Allow the concrete to dry overnight. Remove the duct tape and the wood form. Keep the cement moist.